Shield Solutions

Matching up with the ever increasing requirements of the customers, our company is involved in offering SMP-1500R Grinder Machine.

Description

• SMP-1500R is designed for large scale construction and used for grinding, surface preparation, polishing. With higher effectiveness, it can reach a range of sheen state easily equipped with SM metal tools and SM resin pads. Remote control or joystick is available as option. Also, you can choose 3-head or 4-head.

Feature

• Remote control, Joystick as option
• Integral vacuum Cleaner
• Weight Shifting System
• Electrical Lifting System

Benefit
Remote Control

• Remote control can increase productivity as well as make time for users to prepare next step or arrange other work. Start switch and emergency switch are equipped.

Patented Technology : Integral Vacuum Cleaner

• Installed dust box can offer 3 in 1 function. Firstly, it can collect dust generated from polishing process with resin pads. Secondly, to control heavy dust from grinding,
• you can connect the machine to another industrial vacuum cleaner. Thirdly, it is designed to serve as a water tank duringwet type grinding & polishing. 2 vacuum motors are installed so user can choose to operate 1 motor or 2 motors.

Patented Technology : WSS

• WSS(Weight Shifting System) is not only safer for users but also improves work efficiency by putting weight pressure on your desired spot indicated on the diagram. Also, it can serve as footrest, pushing up front part of machine.

Electrical Lifting System

• This system can adjust the height of abrasives timely during operation, which can ensure grinder’s optimal operation capacity.

Driving Wheel

• In remote control or joystick mode, the speed of driving wheel can be adjusted, which is displayed in LED. Urethane rubber wheel does not leave tire marking and the machine can move along 45 degree angle

As an affluent name in this domain, we hold expertise in providing high quality Floor Polishing Machine.

Description
Setting up & Safety Instructions

• Before use, the user must be trained in handling the machine and the hazardous dust.
• Setting up & Safety Instructions
• Position the grinder in the working area.
• Check the dust cover tightened.
• Check the electric specification – 220V single phase, 50Hz.
• Do not use it on wet floor.
• Always wear personal safety equipment such as sturdy non-slip boots, ear protection, dust mask and approval eye protection.
• The machine should not be used in areas where potential for fire or explosions exist.
• Make sure the cord is not pinched in doors, fences or the like.

Notice

• Please pay attention to the safety instructions.
• Please read this instruction manual carefully before using Grinder MPG-24(E)

Mounting of Grinding Disks

• Take the following safety measures when mounting grinding disks.
• Remove any weight.
• Disconnect the power supply and the power cable.
• The machine up, and remove the old grinding disks using the special tool.
• The tools can be also be bolted to the machine if required.
• Caution : The disks may be hot after operating the machine.
• See pictures as following.
• The direction of disc rotation counterclockwise. Therefore, bolting direction to fasten the disc to center shaft should be clock wise.

Operation

• The following section describes how to operate and use the grinding machine.
• The section does not deal with the technical aspects of grinding such as choice of grinding tool etc.

Note

• Only personnel with the requisite training may operate the machine.
• It is assumed that the relevant personnel have read the safety regulations.
• And that the machine is positioned on the surface intended for grinding,
• that the surface is not inclined and that the grinding disks are mounted.

Measures Period to Start

• Inspect the floor carefully and remove any protruding items
• such as reinforcement bars and bolts, as well as any loose material that could get caught in the machine.
• Set the handle bar in the desired working position.
• Fit the appropriate tools to the machine.
• Mount and check the splash guard.
• Connect the voltage to the terminal on the side of the frequency converter.
• If the floor is dry ground, a dust extractor should be connected and started before staring the machine.

Maintenance

• Always clean the machine after use. Do not use a pressure washer as this can force water into various components causing damage. We recommend the regular inspected once three month and change if worn.